User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
• You can confirm that the SD card was installed correctly by checking the control panel menu or
configuration page.
• VM card: Make sure [JavaTM/X] appears when the [Switch Functions] key is pressed.
• Camera direct print card: Printing the configuration page, if the camera direct print card is
installed properly, "PictBridge" will appear for "Printer Language" in "System Reference". For
details about printing the configuration page, see page 100 "Test Printing".
• XPS card: Printing the configuration page, if the XPS card is installed properly, "XPS" will
appear for "Printer Language" in "System Reference". For details about printing the
configuration page, see page 100 "Test Printing".
• If the card is not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after trying the installation a second time, contact your sales or service
representative.
• Do not touch the card while the printer is in use. It may come loose, even if pushed only slightly. The
slot cover must be reattached.
Installing Options
midas-p3_com_operating_instructions_gb_00198474_eng.xml 69
Draft 2016/01/18