User's Manual

Select Security Type
Select the communication mode
802.11 Ad-hoc Mode
Set the SSID
Select ad-hoc channel
Confirm the connection
Select Security Type
Select the communication mode
Infrastructure Mode
Set the SSID
Confirm the connection
CQT650
• When [802.11 Ad-hoc Mode] is selected in Communication Mode, select the channel for [Ad-hoc
Channel]. Set a channel that matches the type of wireless LAN being used. For details about setting
the Ad-hoc Channel, see page 93 "Wireless LAN Configuration".
• For details about security type settings, see Security Guide.
Checking the signal
This section explains how to check the printer's radio wave status.
When using in infrastructure mode, you can check the printer's radio wave status using the control panel.
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [Host Interface] Press [OK]
2. Select [Wireless LAN] Press [OK]
3. Select [Wireless LAN Signal] Press [OK]
The printer's radio wave status appears.
1. Press the [User Tools] key, and then display the [Wireless LAN] screen.
[System Settings] [Interface Settings] [Wireless LAN]
Connecting the Printer
midas-p3_com_operating_instructions_gb_00198490_eng.xml 87
Draft 2016/01/18