User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
1. Press the [User Tools] key, and then display the [Network] screen.
[System Settings] [Interface Settings] [Network]
2. Select the Ethernet speed.
[Ethernet Speed] Select the Ethernet speed [OK]
Wireless LAN Configuration
• This feature is available only when the optional wireless LAN interface board is installed.
• Ethernet and wireless LAN cannot be used at the same time.
• To use a wireless LAN, you must set the IP address, subnet mask, gateway address, DHCP, Frame
Type (NW), and active protocol. For details, see page 90 "Ethernet Configuration".
• For details about setting items and their default values, see:
• page 255 "Host Interface (SP C340DN)" (for SP C340DN)
• page 291 "Interface Settings" (for SP C342DN)
Configuring a Wireless LAN Using Easy Setup (When Using a Wireless Access Point
Supporting WPS)
If the wireless access point in use supports WPS, the wireless LAN connection settings and security
settings can be automatically configured in Infrastructure mode.
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [Host Interface] Press [OK]
2. Select [Network] Press [OK]
3. Select [LAN Type] Press [OK]
4. Select [Wireless LAN] Press [OK] Press [Escape]
5. Select [Wireless LAN] Press [OK]
6. Select [Wireless LAN Easy Setup] Press [OK]
7. Select [Push Button Method] or [PIN Code Method] Press [OK]
If you select [Push Button Method], press the WPS button on the wireless LAN access point.
Configuration
midas-p3_com_operating_instructions_gb_00198499_eng.xml 93
Draft 2016/01/18