User's Manual

5. Select [Wireless LAN] Press [OK]
6. Select [Communication Mode] Press [OK]
7. Select the transmission mode of the wireless LAN Press [OK]
8. If [802.11 Ad-hoc Mode] is selected for [Communication Mode], select [Ad-hoc
Channel] Press [OK]
9. Select the Ad-hoc channel Press [OK]
Select an Ad-hoc channel according to the IEEE 802.11 standard you are using.
• When using IEEE 802.11 b/g:
Channels 1–11
• When using IEEE 802.11 a:
Channels 36, 40, 44, and 48
• When using IEEE 802.11 n:
Channels 1–11, 36, 40, 44, and 48
• The transmission mode of the wireless LAN can also be set using Web Image Monitor. For
details, see Web Image Monitor Help.
Setting the SSID
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [Host Interface] Press [OK]
2. Select [Wireless LAN] Press [OK]
3. Select [SSID Setting] Press [OK]
4. [SSID] [Enter] Enter the SSID Press [OK]
You can switch between lower/upper case letters and numeric characters by pressing
[ab/AB/12].
The characters that can be used are ASCII 0 × 20-0 × 7e (32 bytes).
• The SSID can also be set using Web Image Monitor. For details, see Web Image Monitor
Help.
Setting the communication mode
1. Press the [User Tools] key, and then display the [Network] screen.
[System Settings] [Interface Settings] [Network]
Configuration
midas-p3_com_operating_instructions_gb_00198499_eng.xml 95
Draft 2016/01/18