User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
2. Select Wireless LAN as the network interface to be used.
[LAN Type] [Wireless LAN] [OK]
3. Press [Exit].
4. Press [Wireless LAN], and then specify the transmission mode and the channel to be
used for transmission.
• [Communication Mode]
Specify the transmission mode for the Wireless LAN.
[802.11 Ad-hoc Mode] or [Infrastructure Mode] [OK]
• [Ad-hoc Channel]
Select an Ad-hoc channel.
Select a channel [OK]
Select an Ad-hoc channel according to the IEEE 802.11 standard you are using.
• When using IEEE 802.11 b/g:
Channels 1–11
• When using IEEE 802.11 a:
Channels 36, 40, 44, and 48
• When using IEEE 802.11 n:
Channels 1–11, 36, 40, 44, and 48
• The transmission mode of the wireless LAN can also be set using Web Image Monitor. For
details, see Web Image Monitor Help
Setting the SSID
1. Press the [User Tools] key, and then display the [Wireless LAN] screen.
[System Settings] [Interface Settings] [Wireless LAN]
2. Enter the SSID.
[SSID Setting] [Enter SSID] Enter the SSID [OK] [OK]
• The SSID can also be set using Web Image Monitor. For details, see Web Image Monitor
Help.
2. Setting Up the Printer
96 midas-p3_com_operating_instructions_gb_00198499_eng.xml
Draft 2016/01/18