User's Manual

Setting items Description
Performs dithering using a pattern appropriate for thin
lines and small fonts.
Gray Reproduction (Text/Line
Art):
Select this setting when printing text and line art.
• Black/Gray by K
Prints black and gray text and graphics using black
toner only.
• Black by K
Prints black text and graphics using black toner only.
• CMY+K
Prints black and gray text and graphics using all toner
colors.
• Black/Gray by K (Text only)
Prints black and gray text using black toner only.
• Black by K (Text only)
Prints black text using black toner only.
Black Over Print: Specify whether or not to print black color over other colors.
When this setting is set to [Off], the areas where black and
other colors overlap become blank for each color separation
other than black.
CMYK Simulation Profile: This function simulates an offset printing color process. Select
the appropriate ink profile to print the output colors so that
you can check the colors of the draft document before
performing offset printing.
Paper Type: Select the paper type to use.
Rotate by 180 degrees: Specify whether or not to rotate the image by 180 degrees
when printing.
Orientation Override: Select this setting when paper orientation cannot be specified
in some applications. If data is rotated in an unwanted
direction on the output page, use this setting to specify the
data orientation to be applied when printing.
Convenient Print Functions
midas-p3_com_operating_instructions_gb_00198546_eng.xml 165
Draft 2016/01/18