User's Manual

• If [Stored Print (Shared)] or [Store and Print (Shared)] is selected when a Stored Print file is stored,
the user who created the document and all users who have print privileges can print the document
using the control panel. This setting is available when User Authentication is enabled using the PCL
6 printer driver. For details, see Security Guide.
• Even if you specify the time to print a Hold Print file in [Set Print Time], the printer does not print the
file at the specified time, but performs as follows:
• When the specified print time is close to the time in the printer's built-in clock, printing may
start immediately.
• When the main power of the printer is turned off, printing will not start when the specified print
time arrives. To print a document whose print time has been specified and the time has
already passed, set [Jobs Not Printed As Machn. Was Off] to [On] in [System] under [Printer
Features]. For details, see page 314 "System".
• If an error message is displayed on the control panel, printing will not start even if the
specified print time arrives.
Sending a print file with Mac OS X
1. After creating a document, open the printing preferences screen in the document's native
application.
2. Select [Job Log] in the pop-up menu, and then configure the following setting:
• User ID:
Enter a user ID.
• Job Type:
Select a job type.
Select [Stored Print] to store the document in the printer and print it later using the control
panel.
Select [Store and Print] to store and print the document at the same time.
• File Name:
When storing a Hold Print or Stored Print file, specify a file name as necessary.
• Password:
When storing a Locked Print file, enter a password.
When storing a Stored Print file, specify a password as necessary.
• Set Print Time
When storing a Hold Print file, specify the time to start printing as necessary.
4. Printing
178 midas-p3_com_operating_instructions_gb_00198595_eng.xml
Draft 2016/01/18