Operation Manual Digital Camera RDC-5000

Erase All Images

All recorded files are erased.

Important

Note

• Remember that files cannot be restored once they are erased. Before

starting to erase files, make sure that you want to erase them.

q Set the mode dial to [ ] and press the

CARD/IN button to select a source file to

be erased.

An erase menu is displayed.

w Press the ▼ or ▲ button to select

[ERASE ALL IMAGES] and press the

ENTER button.

The erase all images menu is displayed.

Note

• To cancel the operation, set the mode

dial to another mode.

e Press the shutter release button.

The “ERASING” message is displayed, and all

the files are erased.

Note

• To cancel the operation, press the

MENU button. The erase menu is

displayed.

The erase menu is displayed again after erasing

all the images. Then, turn the mode dial to

select another mode.

Note

• High-capacity SmartMedia cards or larger number of files may take long

time to erase.

• Protected files, which are identified by the

mark, are not erased but

remain on the SmartMedia memory card. See “Protecting a File” (p.87).

[

ERASE

]

ERASE SINGLE IMAGE

ERASE ALL IMAGES

ERASE SELECTED IMAGES

SEL.:ENTER

ERASE ALL IMAGES

START : RELEASE

CANCEL: MENU