Connecting to a Personal Computer

137
6
Using the Extension Functions
Note
• In this section, the explanation uses the method of clicking the right
button, but the function can also be selected from the Explorer [File]
menu.
■ For Macintosh
In the case of Macintosh, [Save Configuration File...] and [Restore
Configuration File...] are performed using the [SETUP MENU] application.
A Connect the camera correctly to the PC and set the camera’s
mode dial to [ ]. Then turn the camera and the PC on.
B Select [RDC-i Mounter] in [Control Panels] from the Apple menu.
The RDC-i Mounter window will be displayed.
C Click on [Set Prefs...].
Note
• You cannot click on [Set Prefs...] unless one of the storage memories
has been mounted. If the storage memory has not been mounted,
mount it first (P.133).
• Depending on the connection method and conditions, the screen for
inputting the camera’s IP address may be displayed. In this case, input
the IP address displayed on the camera’s LCD monitor.
The selection screen will be displayed.
D Select [Save Configuration File...].
The dialog box for specifying the location and file name will be displayed.
E Specify the location and file name and then click on [Save].
The settings are now saved in the PC.