Connecting to a Personal Computer

142
For Macintosh
This section explains how to use the TWAIN function on a Macintosh.
A Check that the camera is properly connected to the PC, that the
camera is turned on and that the camera’s mode dial is set to
[ ].
B Mount the storage media of the camera to which you want to
download using the RDC-i Mounter.
Instructions on how to mount the camera media, see “Using the RDC-i
Mounter” (P.131).
C Start up the application software compatible with TWAIN on the PC.
The explanation given here is based on [Adobe Photoshop] application
software.
D Select [TWAIN Aquire...] from the [File] menu.
The names of the functions in the menu may differ depending on the
application software. For further details, refer to the operation manual for the
application software.
Note
• If more than one item of TWAIN-compatible equipment has been
connected, it is necessary to select which TWAIN equipment you will
use before performing the operation described above (the camera
uses [RDC-i TWAIN]). Use the function titled [Select TWAIN Select...]
or similar. In most cases, this item is found next to [TWAIN Aquire...].
For further details, refer to the operation manual for the application
software.