Connecting to a Personal Computer

Controlling the Camera from the Browser

You can access the camera’s homepage from the PC using the Web browser

and view data recorded in the camera or make various camera settings. This

section explains how to access the homepage.

Preparing the Camera

To perform an operation when the camera is connected to a PC, set the mode

dial to [

] (PC).

A Check that the camera and PC are properly connected.

See

• P.20 “Connecting the Camera to a PC”

B Check that the camera and the PC are turned on.

C Set the mode dial to [ ] (PC).

Opening the Camera’s Homepage on the Browser

Start up the Internet Explorer or Netscape Communicator browser and open the

camera’s built-in homepage.

Important

Note

• When you can not connect the camera from the Web browser, check

the proxy server setting. → P. 168 “Checking the Proxy Server”.

• When the dial-up settings are made on a PC, the screen for selecting

[Work offline]/[Retry] may be displayed.

Cancel the automatic dial-up setting of the browser, and then select

[Retry]. → P. 167 “Selecting ‘Never dial a connection’”.