English Safety Information English Safety Information English Safety Information English Safety Information
Information Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Notes The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see “Machine Types”, Hardware Guide in the CD-ROM.) • Type 1: CLP37DN/SP C430DN/LP137CN/Aficio SP C430DN • Type 2: CLP42DN/SP C431DN/LP142CN/Aficio SP C431DN Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Laws and Regulations Legal Prohibition Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver’s licenses. The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy.
Note to users in the United States of America FCC Rules ❖ Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operati.on Responsible party: Ricoh Americas Corporation.
Notes on lamp(s) inside this machine Notes to users in the state of California Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Note to users in Canada Note This Class B digital apparatus complies with Canadian ICES- 003. Remarque concernant les utilisateurs au Canada Avertissement Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Safety Information When using this machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.
• Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily. • Do not obstruct the machine’s vents. Doing so risks fire caused by overheated internal components. • When new, electrical devices containing volatile materials will normally release emissions into the air of their vicinity.
• Do not use extension cords. Doing so could result in fire or electric shock. • Do not use power cords that are damaged, broken, or modified. Also, do not use power cords that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could result in fire or electric shock. • Touching the prongs of the power cable’s plug with anything metallic constitutes a fire and electric shock hazard. • The supplied power cord is for use with this machine only. Do not use it with other appliances.
• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power immediately by pressing the power switch. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock. • If metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately by pressing the power switch.
Handling the machine’s interior This section explains safety precautions about handling the machine’s interior. R WARNING: • Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside this machine are high voltage components that are an electric shock hazard and laser components that could cause blindness. Contact your sales or service representative if any of the machine’s internal components require maintenance, adjustment, or repair.
Handling the machine’s supplies This section explains safety precautions about handling the machine’s supplies. R WARNING: • Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite on contact with naked flame. • Do not store toner (new or used) or toner containers anywhere near naked flames. Doing so risks fire and burns. Toner will ignite on contact with naked flame. • Keep the polythene materials (bags, gloves, etc.
Safety Labels of This Machine This section explains the machine’s safety information labels. Positions of RWARNING and RCAUTION labels This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. 1 2 3 4 5 6 BYK001 1 BYK140 Do not incinerate spilled toner or used toner. Toner dust is flammable and might ignite when exposed to an open flame.
3 BKY202 Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. 4 BYK147 Some parts of the Transfer roller may be charged with high voltage, and pose electric shock hazard. Do not touch parts other than the ones specified in the maintenance guide. 5 BYK146 High temperature parts. Turn off the main power and be careful when replacing fusing unit/removing misfed paper. 6 BYK145 The inside of this printer becomes very hot.
ENERGY STAR Program ENERGY STAR® Program Requirements for Imaging Equipment The ENERGY STAR® Program Requirements for Imaging Equipment encourage energy conservation by promoting energy efficient computers and other office equipment. The program backs the development and dissemination of products that feature energy saving functions. It is an open program in which manufacturers participate voluntarily.
❖ Specifications Panel Off Mode Energy Saver Mode (Low Power Mode) Auto Off Mode (Sleep Mode) Power Consumption 150 W or less Default Time 10 seconds Recovery Time 10 seconds Power Consumption 110 W or less Default Time 1 minute Recovery Time Type 1: 24 seconds or less Type 2: 26 seconds or less Power Consumption 6 W or less Default Time 11 minutes Recovery Time Type 1: 47 seconds or less Type 2: 50 seconds or less Recycled Paper We recommend use of recycled paper which is environment f
16
