User's Manual

When Nozzle Clogging Cannot Be Solved
4-23
1
1
1
4
Routine Maintenance
5
Register the Nozzle number that needs NOZZLE
RECOVERY and then press key.
(1) Select the registration number from 1 to 10 by pressing
key and press the .
(2) Register the nozzle number that needs recovery by pressing
key and press the .
• Check is performed at the same time of the registration. When
there is a mode for which nozzle recover is invalid, the screen of
the Step 3 of “Check the print condition for which nozzle recovery
cannot be performed”.
6
Press the key several times to end the setting.
Check the print condition for which nozzle recovery cannot be performed
Depending on the registered nozzle, there is a mode on which recovery is not reflected. Check the print
condition for which recovery cannot be performed.
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
• Up to 10 nozzles can be registered per 1 nozzle line.
• Even if you use this function, time required for drawing does not change.
• Depending on the registered nozzle, there is a mode on which recovery is not reflected. Check the
print condition for which recovery cannot be performed with the check function. ( P.4-23)
• When you use white ink, print on the clear film to check.
• When there are many registered nozzles, it takes much time to display the checked result.
H1 - A
No.1:184
Registration number:
1 to 10
Recovery nozzle No.:
or OFF
1
10
21
30
41
50
61
70
81
90
101
110
121
130
141
150
161
170
181
190
201
210
221
230
Nozzle missing
No.184
Nozzle
number
Nozzle missing
No.16
Nozzle missing
No.128
Registration
number
Recovery
Nozzle No.
State
116
Target for nozzle recovery
2 128
Target for nozzle recovery
3 184
Target for nozzle recovery
4 OFF
No registration
5OFF
No registration
Example of nozzle to be recovered