User's Manual

Replacing consumables

4-37

Routine Maintenance

Replacing the white ink filter

Turn off the power supply of the printer and replace the white ink filter.

Turn OFF the power of the printer.

• After turning off the power supply with the power switch at the

operation panel, move the main power switch (2 switches) at the

right surface to “o” side.

Open the W filter maintenance cover.

• Remove the screw of the W-filter maintenance cover, and open the cover.

Replace the white ink filter.

(1) Remove the fitting and the filter.

(2) Attach new filter and fix it with the fitting.

• If the fitting is not fixed enough, ink may leak. Tighten the fitting firmly.

Attach the W filter maintenance cover.

• When replacing the white ink filter, be sure to wear the attached goggles and the gloves. Ink

may get in your eyes.

• Organic solvent is used for ink.

If it adheres to your skin or gets in your eyes, immediately wash off with water enough.

• When removing the filter, ink in the tube may splash or drop. Before removing the filter,

cover around the filter with paper towels etc.

• When replacing the filter, be careful not to fold the tube.

POWER OFF

Screw

W-filter maintenance cover

Fitting

Filter