User's Manual

2-28
Starting a Printing Operation
1
Setting a Media ( P.2-5)
2
Checking the Heater Temperature
• Check the CONSTANT lamp lights in [PRE], [PRINT], and
[POST] below the display.
3
Press the key in LOCAL.
• If the heater temperature has not reached the setting value, the
right screen is displayed.
Even if it has not reached, you can move to REMOTE when
pressing the key.
• The screen changes to REMOTE, and data can be received from
the PC.
4
Transmit data to be printed from the PC.
• The ACTIVE lamp blinks and the printing conditions are
displayed.
• For the method of data transmission, see the instruction
manual for the output software.
5
Start printing.
• When using a roll media, rewind the media by hand before printing so that it is not loose.When the roll
media has not been rewound tightly, it may cause the image quality to deteriorate.
• When making a test print, printing the actual image data is recommended. Depending on the image
data, you may not be able to achieve the desired image quality.
TEMPERATURE CONTROL !
PLEASE WA I T
*REMOTE* 1200x1200 R
16 .Bd .VD. x2 xx . xxm
Resolution
Number of passes
The length of
media drawn
Scan direction
Ud : Unidirectional
Bd : Bidirectional
Data type
VD : Variable data
ND : Normal data
Scanning speed
x1 : Standard
speed
x2 : Double
speed
With/ without nozzle
recovery setting