User's Manual
3-6
Perform setting to reduce stripes between passes
In case that feeding stripes cannot be resolved even though media correction (P.2-23) is performed, make
MAPS(Media Advance PassSystem) valid. Feeding stripes become less visible by distributing the pass
boundary.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [MAPS].
4
Press the key.
5
Press to set ON/OFF.
• Set Value : OFF, ON
6
Press the key.
• When you select OFF, proceed to the Step 9.
7
Press to change print speed.
• Set Value : -50 ~ +50%
8
Press the key.
9
Press the key several times to end the setting.
• Depending on the printing condition, the effect cannot be recognized.
• When you speed up, nozzle recovery effect cannot work in some cases. Use it after
checking.
FUNCT I ON
SETUP [ ENT ]
SETUP
FEED COMP . [ ENT ]
SETUP
MAP S [ ENT ]
MAP S
:OFF
MAP S
:ON
PR I NT SPEED ADJUST
=0%
PR I NT SPEED ADJUST
=10%
SETUP
MAP S [ ENT ]