User's Manual

3-7
1
1
3
Convenient use
5
6
Setting Auto Cleaning
You can set items so that the head cleaning is automatically performed when printing has been completed for
the set interval.
When printing has been completed, the machine count the print count printed after the previous head cleaning
and performs the cleaning automatically if necessary.
The machine can perform a stable printing operation with its heads always kept clean.
The first cleaning is performed immediately before the first printing after the machine is started. Then
subsequent cleaning is performed every printing on the specified count of print.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [AUTO CLEANING].
4
Press the key.
5
Press to set a cleaning interval.
• Set value : OFF / 1 to 1000page
• When selecting OFF, proceed to Step 8.
6
Press the key.
7
Press to set a cleaning type.
• Set value : NORMAL / SOFT / HARD
8
Press the key.
9
Press the key several times to end the setting.
FUNCT I ON
SETUP [ ENT ]
SETUP
FEED COMP . [ ENT ]
SETUP
AUTO CLEAN I NG [ ENT ]
INTERVAL
=OFF
INTERVAL
= 1page
TYPE
:SOFT
TYPE
:NORMAL