User's Manual
18
Names of the terminals on the rear panel
(6) (7)
(5)(4)(2)(1) (3)
(11)
(10)(9)(8)
(12)
Name : Main Function
(1) USB terminal :
Connects a commercial USB memory device.
p.48
(2) HDMI
™
terminal : Inputs digital signals from HDMI (High-Definition
Multimedia Interface) compatible digital source.
(3)
AUDIO IN terminal
: Inputs audio signals from a computer or video equipment.
(Multiple use for COMPUTER 1 IN/2 IN, VIDEO and S-
VIDEO)
(4) S-VIDEO terminal : Inputs S video signals from video equipment.
(5) COMPUTER 1 IN (Y/P
B
/P
R
1) terminal
: Inputs analog RGB signal from a computer or a
component video signal (Y/P
B
/P
R
) from video equipment.
(6) COMPUTER 2 IN (Y/P
B
/P
R
2) terminal/MONITOR OUT terminal
:
Inputs analog RGB signal from a computer or a
component video signal (
Y/P
B
/P
R
) from video equipment.
It can also be used as MONITOR OUT terminal by the
switch of (7).
(7) Switch :
Switches between COMPUTER 2 IN and MONITOR OUT.
(8) LAN terminal : Connects a network cable.
(9) AC IN socket : Connects the supplied power cord here.
(
10
) AUDIO OUT terminal : Outputs audio signals.
(
11
) VIDEO terminal : Inputs video signals from video equipment.
(
12
) CONTROL terminal : When operating the projector via a computer, connect
this to the controlling computer’s RS-232C port.
p.
103