User's Manual

20
Operating a computer using the remote control
A computer can be operated using the projector’s remote control. This function is available
on any computer with the Windows
®
2000, Windows
®
XP, Windows Vista
®
, or Windows
®
7
operating system, that is equipped with a USB port which can support USB 2.0 (The mouse
remote control receiver is also supported on Mac OS X for the Mac). However, please note that
Ricoh does not guarantee the operation of all computers.
1
Connecting a computer
Connect the mouse remote control receiver (supplied) to a computer.
Mouse remote control receiver
To USB port
The remote control may fail to operate
if the mouse remote control receiver
is exposed to bright sunlight or
fluorescent lighting.
In such a case, change position or
direction of the mouse remote control
receiver and retry.
2
Operating a computer
Operate remote control’s buttons towards the mouse remote control receiver.
Moving the mouse pointer
Press the mouse control button in the direction you wish the mouse pointer to move.
To left click
Press the L-CLICK button (There are two L-CLICK buttons. Either is usable).
To right click
Press the R-CLICK button (There are two R-CLICK buttons. Either is usable).
To drag and drop
Holding down the L-CLICK button, move the mouse control button until the mouse
pointer is over the desired location, then release the L-CLICK button.
Using the computer’s page up [
↑
] and down [
↓
] function
Press the PAGE+ and PAGE- buttons to switch PowerPoint
®
slides.
Mouse control
PAGE –
L-CLICK
R-CLICK
L-CLICK
PAGE +
Remote Control Top Remote Control Underside




