User's Manual

24
Connection
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some computers cannot be used with or connected to this projector.
Check for an RGB and an HDMI output terminal, supported signal
p. 100
p. 101
, etc.
Turn off the power of both devices before connecting.
The figure below shows sample connections. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
•
•
•
•
To audio
output
Audio cable (not supplied)
Conversion adapter
BNC-pin (not supplied)
To Y/C
B
/C
R
output
Green(Y)/Blue(C
B
)/
Red (C
R
)
RGB cable
(supplied)
Video cable
(not supplied)
Audio cable
(not supplied)
To audio
output
White (L)/
Red (R)
To RS-232C
terminal
p. 103
Audio cable
(not supplied)
Video recorder,
DVD player, etc.
Computer
To
video
output
DVD video recorder, etc.
Audio cable
(not supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To audio
output
White (L)/
Red (R)
To RGB output
Computer (for control)
To
S-video
output
To audio input White
(L)/Red (R)
Audio amplifier, etc.
It is necessary to switch
to MONITOR OUT by the
switch.
p.18
S-video cable
(not supplied)
Control
cable (not
supplied)
* The connection for COMPUTER 1 IN terminal described here is also applicable for COMPUTER 2 IN terminal.
Monitor
HDMI™ cable
(not supplied)
DVD video recorder, etc.
To HDMI™
terminal