User's Manual

25
Preparations
Notes
When COMPUTER 2 IN terminal is used as MONITOR OUT terminal, the signal which is
input to COMPUTER 1 IN terminal is output.
Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
A computer monitor cannot accept Y/PB/PR signals correctly.
The AUDIO IN terminal can be used for devices connected to COMPUTER 1 IN terminal,
COMPUTER 2 IN terminal, VIDEO terminal and S-VIDEO terminal.
When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.
Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
Some devices may not operate properly when connecting with HDMI™.
For optimal performance, it is recommended that you use an HDMI™ cable with the HDMI
Logo ( ). To display a 1080p signal format, you will need a High Speed HDMI™
cable. A conventional HDMI™ cable may not work properly.
When connecting a network cable, use a shielded cable.
•
•
•
•
•
•
•
•
•