User's Manual

35
Operations
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting 2 menu and press the or
button.
2
Select [Password setting] and press the or button.
3
Select [On].
4
Select [OK] and press the button.
The password entry screen is displayed.
5
Enter the password using the numeric keys of the remote control.
6
The password setting will be set as [On].
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using the numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is incorrect, a message will appear
prompting you to re-enter the password, and the password entry screen is displayed
again. If you enter an incorrect password more than 5 times, the projector will
automatically power off and enter standby mode.
Note
When the password setting is [On], the password function will be enabled only
when the projector is restarted after the power cord has been unplugged.
The password that you set will not be enabled when restarting from standby mode
without unplugging the power cord.
How to set password (from [On] to [Off])
1
Select [Password] in the Default setting 2 menu and press the or
button.
The password entry screen is displayed.
2
Enter the password using the numeric keys of the remote control.
3
Select [Password setting] and press the or button.
4
Select [OFF].
5
Select [OK] and press the button.
•