User's Manual

38
Item Description Computer Y/PB/PR HDMI Video S-video Network USB memory
Position
Press then change mode
using and adjust with
Yes No No No No No No
Phase
Adjust to eliminate flicker.
Yes No No No No No No
Frequency
Adjust to eliminate periodic
patterns and flickering when
many fine vertical lines
appear on the screen.
Yes No No No No No No
H-position
Adjust the horizontal position
of the image.
Yes No No No No No No
V-position
Adjust the vertical position of
the image.
Yes No No No No No No
Clamp 1
Adjusts the clamp pulse
position.
Yes No No No No No No
Clamp 2
Adjusts the clamp pulse
width.
Yes No No No No No No
*1: [Noise reduction] may not work depending on signal type.
*2: [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
*3: [RGB input range] can only be set with RGB signals via an HDMI
TM
cable.
Using the menus 1 (Continued)