User's Manual

Setup using the Setting display (2)



Projector settings (Be sure to read this subsection.)

Using the factory settings as-is may suffer security damage, so be sure to change

the projector settings.

1. Press the MENU button twice

2. Select a Category

3. Make settings

Select a category by using

The following 5 categories are

available:

Displays the current settings

of selected category.

Item shown in gray cannot

be set with the currently set

conditions of the projector.

p.51

Network utility

setup

Network Projector

setup

p.57

Slideshow setup

Status display

p.60

The figure shows a typical example. As the display may differ depending on the

item, use the following pages as a reference.

While the video file transfer function of Network Utility or the slideshow function is

in use, the background image of the Setting display (2) does not appear.

Item

The Setting display (2) is displayed.

* Appears only when Network or USB memory input is selected.

These marks signify the items can be

selected from the list by using .

After an item is selected, apply it by

pressing .

Press or to open the menu.

4. Back RETURN button

5. End Press the MENU button or RETURN button.

(The menu disappears 30 seconds after the last operation is conducted.)

Control setting

p.58



Using the menus 2