User's Manual

51
Network/
USB memory
Setting up the Network Projector/Network Utility
If you select Network Utility , the following items can be set.
Category
Item
Description
Wireless
LAN
Easy Connect
(USB memory)
[Yes No] [Enter: ]
LAN settings
Mode: Ad hoc Infrastructure
SSID: Specify a desired character string (1 to 32 characters).
[ : Move left or right one character.] [ to : Set a character.]
DHCP: Use Not use
IP address: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Subnet mask: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Gateway: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Security
Network authentication: Network Authentication Setting
[ or : Enter setting] [ : Selection] [Enter: ]
None/Open/Shared/WPA-PSK/WPA2-PSK
Encryption: Select an encryption type using the button.
Off/WEP/TKIP/AES
Key index: Select a desired number (1 to 4) using the buttons.
Network key: Specify a desired character string.
(WEP: 5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
(TKIP/AES: 8 to 63 characters, or 64 digits in hexadecimal notation)
[ : Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Setting
Initialization
Reset all the wireless LAN settings.
Confirm:
[Yes] [No] [Enter: ]
Wired
LAN
LAN settings
DHCP: Use Not use
IP address: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Subnet mask: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Gateway: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
* To enter characters, use the numeric keypad on the remote control.
