User's Manual

[Security for wireless LAN settings]

Set the authentication to enhance network security. Select a method identical to that of

the wireless LAN terminal to be connected with.

Set Encryption according to the setting you made for Network authentication, as

follows.

When you have set Network authentication to Open or Shared, select WEP for

Encryption.

When you have set Network authentication to WPA-PSK/WPA2-PSK, select TKIP or

AES for Encryption.

Note:

Network authentication is factory-set to None. If you use the projector with this

setting left unchanged, security may be compromised due to access by a third

party within the projector’s coverage.

When you have set Encryption to WEP, Key index must be set. By default, “1”

is selected. Select a key index identical to that of the wireless LAN terminal to be

connected with.

Note: Since the range of key index varies by product type (1 to 4 or 0 to 3), make

settings with attention.

When you have set Encryption to [WEP]:

For use at an encryption level of 64-bit, specify a string of 5 arbitrary characters or a

string of 10 characters in hexadecimal notation.

For use at the 128-bit level, specify a string of 13 arbitrary characters or a string of 26

characters in hexadecimal notation.

When you have set Encryption to [TKIP]/[AES]:

Specify a string of 8 to 63 arbitrary characters or a string of 64 characters in

hexadecimal notation.

Note 1: Alphabetic characters (A to F, a to f) used in hexadecimal notation are not

case sensitive; the uppercase characters and their lowercase equivalents are

handled to be identical.

Note 2: The longer the strings of characters set for the Network key, the stronger the

encryption becomes, and hence the harder it will be for a third party to decipher

your communications. However, the setting of larger encryption may slow down

communication speed.

Note 3: To set a higher security level, specify a longer string of characters. For

higher security, avoid using a word found in a dictionary and change the key

sometimes.

This item resets the wireless LAN settings to their factory defaults.

•

Using the menus 2 (Continued)