User's Manual

56
Note
If you select [Network Projector] in the Setting display (2) menu, the same items
in [Network Utility] will be displayed except for the following 2 items.
1
[Easy Connect (USB memory)] feature is not available.
2
In the item [Application], [Password] and [Disconnect] are available as
follows.
Category Item Description
Application
Password
Set password On Off
Disconnect Disconnect while transferring an image using Network Projector.
[Yes No] [Enter: ]
See “Setting up the Network Projector/Network Utility”
p.51
to conduct
adjustments and settings for Network Projector.
Computer settings
Refer to your computer’s instruction manuals or wireless LAN adapter to perform the
following settings.
Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).
Set SSID (for some types of wireless LAN adapter, use Network name instead) as
the same as projector’s SSID (at factory shipment, this is set to RDPJ).
If Encryption, Network authentication, Key index and Network key are set on
the projector, set to the same values.
Note
The Easy Connect utility
p.75
allows users to easily connect the projector to
a computer over wireless networks, without making wireless LAN settings. For
Easy Connect support, the computer requires a wireless LAN environment that is
NDIS5.1 or higher driver compliant.
Refer to the user’s manual supplied with the wireless LAN adapter or the wireless
LAN embedded computer for more information.
•

•
•
•
•
Using the menus 2 (Continued)