User's Manual

69
Network/
USB memory
6
Select the projector to transmit to.
A list of the names of the projectors you can
use will appear. (If a projector’s name is not
specified, its ID will be displayed instead.) Select
the checkbox of the projector to be transmitted
to from this list. Then icon is displayed on the
projector’s screen for a few seconds.
It is possible to select only one projector.
7
Click the button.
The selected file’s image is displayed by the projector and the Control window appears
as well.
8
Play the video file via the Control window.
The function of each button and box is as follows:
(Current position): Indicates the playing position. Dragging the slider
can move the playing position.
(Play): Starts playing the video file.
(Freeze): The picture is paused.
(Stop): Stops playing the video file.
(Volume): Adjusts sound volume contained in the video file.
(Mute): Cuts off picture and sound contained in the video file.
(Release mute): Restores picture and sound contained in the
video file.
Notes
Only one file can be sent at a time. To send another file, repeat steps
5
and
7
.
MPEG/AVI/ASF/WMV files can be transmitted.
Additional software may be required to play MPEG2 or ASF files.
The update speed of the transmitted file depends on your computer’s performance and
the surrounding radio environment.
The projector ID is the MAC address of the wired LAN mounted on the projector.
The audio signals transmitted by a computer become mono.
Playing contents protected by copyright is not supported.
•
•
•
•
•
•
•