User's Manual

77
Network/
USB memory
2) Modifying the computer settings using the projector settings
Setting on the projector
1
Turn the projector power on.
2
Switch the input to Network.
3
Press the MENU button twice, then select Easy Connect (USB
memory) in Network Utility settings from the Setting display (2) menu
and press the button.
4
When a confirmation window appears, insert the USB memory device
into the projector.
5
Click Yes then press the button.
The wireless LAN settings are saved to the USB memory device. When successfully
saved, a message appears.
6
Unplug the USB memory device.
Setting on the computer
7
Launch the Network Utility software
application.
8
Insert the USB memory device into the
computer.
9
After a confirmation message appears,
make settings.
10
When the setting is complete, the projector name of the connected
projector or the projector ID (MAC address of wired LAN) is displayed
in projector’s list in the Network utility window.
Note
This operation is allowed only when the Transmission mode is set to Ad hoc in the
projector’s wireless LAN settings. Be sure to use Network Utility version 1.0 or later.
•
•
•