Owner's Manual

• [Wireless LAN Settings]

•

[SSID]

Enter the SSID name. Can contain 32 characters.

When you click [Scan List], a list of access points that is currently available is displayed.

You can select the SSID name from the list.

• [Communication Mode]

Select Infrastructure mode or Ad Hoc mode

• [Ad-Hoc Channel]

Select a channel for Ad-Hoc mode.

• [Authentication]

Select an authentication method.

If [Ad-Hoc] is selected for [Communication Mode], you can select only [Open System]

and [Shared Key].

• [Encryption]

Select an encryption method.

If [Ad-Hoc] is selected for [Communication Mode], you can select only [None] and

[WEP].

• [None]

When it is ON, communication will not be secured by encryption.

• [WEP]

When it is ON, communication will be encrypted in WEP (Wired Equivalent

Privacy).

Specify [WEP Key Length], [WEP Transmit Key ID], and [WEP Key Format] and

enter [WEP Key]. The following table shows the number and types of characters

you can enter, depending on the key settings.

WEP key length is 64 bits WEP key length is 128 bits

WEP format is

Hex

WEP format is

ASCII

WEP format is

Hex

WEP format is

ASCII

WEP key max

length

10 characters 5 characters 26 characters 13 characters

WEP key valid

characters

0–9, A–F, a–f 0x20–0x7e 0–9, A–F, a–f 0x20–0x7e

• [WPA2-PSK]

Using Web Image Monitor