Service manual

Engine Disassemble Procedure
SM 4-69 M085/M086
Replacement
and
Adjustment
4.9.3 ROLLER HOLDER ASSY
1. Release the Boss [A] of the Roller holder ASSY [B] from the Link arm [C].
2. Press the Rib [D] of the Paper feed frame [E], then slide the Separation R shaft bush [F].
3. Remove the Roller holder ASSY [B] from the Main body.
Assembling Note:
When assembling the Roller holder ASSY to the Main body, note the assembling method
referring to the figure above.