Service manual

Adjustments and Updating of Settings, Required After Parts Replacement

SM 4-117 M085/M086

Replacement

and

Adjustment

EEPROM parameter initialization of main PCB (Maintenance mode: code

01)

Refer to p.5-4 "EEPROM Parameter Initialization (Function code 01, 91)", and perform the

EEPROM parameter Initialization of main PCB.

EEPROM customizing of main PCB (Maintenance mode: code 74)

Refer to p.5-39 "EEPROM Customizing (Function code 74)", and perform the EEPROM

Customizing.

For models in France and surrounding countries, Pan-Nordic, Oceania or Iberia, implement the

setting for Code 74 in Maintenance mode first. Then, implement more detailed settings for Code

52.

Operational check of control panel button (Maintenance mode: code 13)

Refer to p.5-17 "Operational Check of Control Panel Button (Function code 13)", and

perform the operational check of control panel PCB.

Operational check of sensors (Maintenance mode: code 32)

Refer to p.5-19 "Operational Check of Sensors (Function code 32)", and perform the

operational check of sensors.

Acquisition of white level data and set the CIS scanner area (Maintenance

mode: code 55)

Refer to p.5-38 "Acquisition of White Level Data (Function code 55)", and perform the

acquisition of white level data and CIS scanner area setting.

Setting the serial number

1. Connect the PC and machine with the USB cable.

2. Double-click the BrUsbSn.exe file which has been copied in the “ALL2” folder to start.