Service manual

Adjustments and Updating of Settings, Required After Parts Replacement

M085/M086 4-124 SM

4.10.3 IF YOU REPLACE THE FB UNIT

Acquisition of white level data and set the CIS scanner area

1. Enter the maintenance mode.

2. <M085>

Press the 5 button twice.

Press the

or button several times. "MAINTENANCE 55" appears on the LCD, and

then press the OK button. "Press START" appears on the LCD.

3. Press the Start button.

The white level data will be acquired automatically.

4. If the procedure is completed, the machine will automatically return to the initial stage of the

maintenance mode.