Service manual

Maintenance Mode

SM 5-7 M085/M086

Service

Maintenance

Placement of CIS Unit in Position for Transportation (Function code 06)

This function is to move the CIS unit in position for transportation located at the left end. When

you fix the machine and check its operation, you need to perform this function last before

packing and shipping.

 Please instruct end users to perform this function if possible before packing and

shipping their FAX machine to a sales agent or a service dealer for the purpose of

repair. (For the procedure to allow users to perform maintenance modes, refer to p.5-2

"How to Enter the End User-accessible Maintenance Mode".)

1. <M085 >

Press in order the 0 and 6 buttons in the initial stage of the maintenance mode.

Press the

or button. "MAINTENANCE 06" appears on the LCD, and then press the

OK button.

The CIS unit moves to the designated position for transportation located at the left side.

The "MAINTENANCE 06" is displayed until the CIS unit is placed in position. When the

scanner unit is placed in the position, the "SCAN LOCK" appears on the LCD.

2. Press the Stop/Exit button. The machine beeps for one second and returns to the initial

stage of the maintenance mode.

 If it is impossible to move the CIS unit in position for transportation, or if this function is

performed while a scanning error is occurring, the "SCAN LOCK ERROR" appears on

the LCD.