Service manual

Maintenance Mode

M085/M086 5-8 SM

ADF Performance Test (Function code 08)

The machine counts the documents fed by the automatic document feeder (ADF) and displays

the count on the LCD for checking of the ADF performance.

1. Set documents. (Allowable up to the ADF capacity.)

The "DOC. READY" will appear on the LCD.

2. <M085>

Press in order the 0 and 8 buttons.

Press the

or button. "MAINTENANCE 08" appears on the LCD, and then press the

OK button.

While counting the documents, the machine feeds them in and out, displaying the current

count on the LCD as shown below.

 [A]: Current count (1st page in this example)

3. Press the Stop/Exit button so that the machine beeps for one second and returns to the

initial stage of the maintenance mode.