Service manual

Maintenance Mode
M085/M086 5-22 SM
PC Print Function setting (Function code 43)
<Function>
Can charge functions such as the switching of the manual paper feed tray and the recording
paper tray or the switching of the resolution.
 Do not work even if enter the maintenance mode during processing of the PC-Print or
Fax-Share. Can work after having performed the PC-Print or Printed the PrintSetting /
FontList / NetWorkConfig if enter the maintenance mode.
 The choices are different whether support the PCL/PS.
<List of Function>
M085
Function Description Set value
Initial
value
Manual Feed Switching of the Manual Feed On/Off Off
Resolution Resolution to print 300/600/1200dpi 600
Toner Save Switching of the Toner Save On/Off Off
Density Switching of the Density level -6 to 6 0
Sleep Time Setting of the time until enter the
SleepMode for the engine
0 to 99 (minutes) 5
Pege Protection Switching of the protection of the
page memory
Off/Letter/A4/Legal/Auto Off
Emulation Switching of the Emulation Auto/HP/PS Auto
Auto I/F Time Switching of the I/F open time 1 to 99 (seconds) 5
Media Type Switching of the recording paper
type
Refer to function
explanation
Plain *
1
Paper (Size) Switching of the area of develop the
image
Refer to function
explanation
Letter *
2
Copies Switching of the print copies 1 to 99 (pages) 1
Orientation Switching of the print direction PortLait/Landscape Portlait