Service manual

Maintenance Mode
M085/M086 5-24 SM
M086/M104
Function Description Set value Initial value
Manual Feed Switching of the Manual Feed On/Off Off
Sleep Time Setting of the time until enter the
SleepMode for the engine
0 to 99
(minutes)
5
Auto I/F Time Switching of the I/F open time 1 to 99
(seconds)
5
P-Pos X-Offset Switching of the offset print position of
the landscape orientation
-500 to 500
(1/300dpi)
0
P-Pos Y-Offset Switching of the offset print position of
the portrait orientation
-500 to 500
(1/300dpi)
0
<Operating Procedure>
1. <M085>
Press in order the 4 and 3 buttons in the initial stage of the maintenance mode.
<M086/M104>
Press the
or button. "MAINTENANCE 43" appears on the LCD, and then press the
OK button. "Manual Feed" appears on the LCD.
2. Press the
or button. The item to change is displayed on the LCD, and press the OK
button.
3. Press the
or button, or charge the parameter using the numeric keys. And press the
OK button. parameter value is confirmed.