Service manual

Maintenance Mode
M085/M086 5-26 SM
Function Set value Problem
DENSIT
Y
-6 to 6 Configure the setting for the
Density. Effective for the print
from the PC, or for the print of
the
NetWorkConfig/TestPrint/Font
List/Configuration from the
panel. Link the setting of the
Toner Save. Judge the both
setting, and decide the
density. When set the Density
or the PC, the setting
becomes effective. And this
setting is ignored.
(Default : 0)
SLEEP
TIME
0 to 99 Configure the setting for the
time until shift to the Sleep
Time. Change the setting of
the Menu (Function).
(Default : 5)
PAGE
PROTEC
TION
Off/Letter/Legal/A4/Auto Configure the setting to
protect the page memory,
when recording in PC. Set in
the PCL-Core. There is not
the influence of the memory
management problem of the
MFC.
(Default : OFF)