Service manual

Maintenance Mode
SM 5-27 M085/M086
Service
Maintenance
Function Set value Problem
EMULAT
ION
Auto/HP-LaerJet/
BR-Script
Configure the setting for the
Emulation. Charge the setting
of the Menu (Function). When
the data include the ENTER
LANGUAGE, the setting
becomes effective. And this
setting is ignored.
(Default : AUTO)
AUTO I/F
TIME
1 to 99 Configure the setting for the
I/F open time. The function is
in the PC-Print. When the
PC-Scan/Remote-setUp
works on the way, the setting
becomes invalid.
(Default : 5)
MEDIA
TYPE
Thin/Plain/Thick/Thicker/Trancparency
Recycled/Bond/Envlopes/EnvThin/EnvThick
Configure the setting for the
type of the recording paper.
Effective for the print from the
PC. When set the type of the
recording paper on the PC,
the setting becomes effective.
And this setting is ignored.
The default value is different
by the country setting in the
Laser product. As for the
basics, the Plain is the default
value. However, the Thin may
be became the default value
in JPN/CHN.
(Default : Plain/Thin (change
in each country))