Service manual

Worker Switch Settings (WSW)
SM 5-63 M085/M086
Service
Maintenance
 Selectors 4 through 8 are not applicable in those countries where no dial tone detection
is supported, e.g., U.S.A.
 Selectors 1 through 3: Redial/Pause button setting and 2nd dial tone detection
Selector
1
Selector
2
Selector
3
0 0 0
No wait is inserted even if the Redial/Pause button is
pressed.
0 0 1 If you press the Redial/Pause button during dialing,
the machine will insert wait as defined in the above
table.
If the Redial/Pause button is pressed repeatedly, the
machine inserts the specified wait multiplied by the
number of depressions. It applies also in hook-up
dialing.
0 1 0
0 1 1
1 0 0
1 0 1
Each time you press the Redial/Pause button in
dialing, the machine will wait for the 2nd dial tone to
be sent via the communications line regardless of
pulse dialing or tone dialing.
In those countries where no dial tone detection
function is supported, the machine inserts a wait of
3.5 seconds.
1 1 0
If you press the Redial/Pause button in pulse dialing,
the machine will first wait for the 2nd dial tone to be
sent via the communications line. After that, pressing
the Redial/Pause button will cause the machine to
insert a WAIT of 3.5 seconds. In tone dialing, the
machine will insert a WAIT of 3.5 seconds.
In those countries where no dial tone detection
function is supported, the machine inserts a wait of
3.5 seconds.