Service manual

Worker Switch Settings (WSW)
M085/M086 5-72 SM
5.3.13 WSW12
Selector No. Function Setting and Specifications
1
2
Min. detection period required for
interpreting incoming calling signal (CI)
as OFF
No. 1 2
0 0 : 1500 ms
0 1 : 500 ms
1 0 : 700 ms
1 1 : 900 ms
3
4
Max. detection period for incoming
calling signal (CI) being OFF
No. 3 4
0 0 : 6 sec.
0 1 : 7 sec.
1 0 : 9 sec.
1 1 : 11 sec.
5
6
Min. detection period required for
acknowledging incoming calling signal
(CI) as ON
No. 5 6
0 0 : 800 ms (1000 ms*)
0 1 : 200 ms
1 0 : 250 ms
1 1 : 150 ms
7 Line connection timing
0: Ringer-OFF period
1: Ringer-ON period
8 Not used.
* 1000 ms in Chinese models.
 Selectors 1 through 4: Min. detection period required for interpreting incoming
calling signal (CI) as OFF / Max. detection period for incoming calling signal (CI)
being OFF
If the machine detects the OFF state of a CI signal for the period greater than the value set
by selectors 1 and 2 and less than the value set by selectors 3 and 4, it interprets the CI
signal as OFF.
 Selectors 5 and 6: Min. detection period required for acknowledging incoming
calling signal (CI) as ON
These selectors set the period required to make the machine acknowledge itself to be
called. That is, if the machine continuously detects a CI signal with the frequency set by