Service manual

Worker Switch Settings (WSW)
SM 5-79 M085/M086
Service
Maintenance
5.3.19 WSW18
Selector No. Function Setting and Specifications
1 Header for fax 0: With header 1: Without header
2
3
Detection enabled time for CNG and
no tone
No. 2 3
0 0 : 40 sec.
0 1 : 0 sec. (No detection)
1 0 : 5 sec.
1 1 : 80 sec.
4
5
Not used.
6 Registration of station ID 0: Permitted 1: Prohibited
7
8
Tone sound monitoring
No. 7 8
0 0 : No monitoring
0 1 : No monitoring
1 0 : Up to phase B at the calling
station only
1 1 : All transmission phases
both at the calling and called
stations
 Selector 1: Header for fax
The setting becomes effective only when do not add the header in the application of the
PC.
 Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone or by picking up the handset of the
machine, the machine can detect a CNG signal or no tone for the time length specified by
these selectors. The setting specified by these selectors becomes effective only when
selector 8 on WSW20 is set to "1."
 Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and Czech
models.
 Selectors 7 and 8: Tone sound monitoring
These selectors set monitoring specifications of the tone sound inputted from the line.