Service manual

Worker Switch Settings (WSW)
SM 5-97 M085/M086
Service
Maintenance
5.3.38 WSW37
Selector No. Function Setting and Specifications
1
Printout of the stored image data of an
unsent document onto an error report
0: No 1: Yes
2
Erasure of the stored image data of an
unsent document at the time of the
subsequent in-memory message
transmission
0: No 1: Yes
3 to 8 Not used.
 Selector 1: Printout of the stored image data of an unsent document onto an error
report
This selector determines whether or not to print out the 1st-page image data of a document
onto the error report if the document image data stored in the temporary memory cannot be
transmitted normally.
 Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the
temporary memory will be occupied with image data. Setting selector 2 to "1" will
automatically erase the stored 1st-page image data of an unsent document at the time of
the subsequent in-memory message transmission only when recording paper or toner runs
out.