Service manual

Error Cause
M085/M086 6-26 SM
Error code 8D
Cover is open
Open the Back cover and remove the jammed paper, or close the Fuser
Cover.
Paper jam near paper eject tray (When power on, it is detects by the eject sensor.)
User Check
 Remove the jammed paper near the paper eject tray or the back cover.
 Close the fuser cover.
Step Cause Remedy
1 Paper eject actuator not operating
smoothly catching in some position.
Re-assemble the paper eject
actuator. Ensure the paper eject
sensor operates smoothly.
2 Eject sensor PCB ASSY failure Replace the eject sensor PCB
ASSY.
3 Main PCB failure Replace the main PCB ASSY.