Service manual

ADF Disassemble Procedure
SM 4-39 M085/M086
Replacement
and
Adjustment
4.7.2 HINGE R / HINGE ARM / HINGE ASSY L
1. Remove the Hinge R [A] from the Hinge arm [B].
2. Remove the Taptite bind B M4x12 screw [C], and then remove the Hinge arm [B] from the
ADF unit [D].
3. Remove the two Taptite cup B M3x10 screws [E] and the Taptite cup S M3x12 screw [F],
and then remove the Hinge ASSY L [G] from the ADF unit [D].