Operation Manual

Error and Status Messages Appear on Smart
Organizing Monitor
"X" represents a displayed message that varies according to the situation.
Message Causes Solutions
No Response from
I/O Device
Check the cable,
power cord, and
main switch.
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
Tray Not Detected or
No Paper
The indicated paper
source tray is not set
properly, or no
paper loaded.
Check the indicated
tray.
Tray 1 has run out of paper.
The bypass tray has run out of
paper.
Load paper into Tray 1. See page 25
"Loading Paper".
Load paper into the bypass tray. See
page 25 "Loading Paper".
Paper Misfeed
X
A paper jam has occurred in the
machine.
Remove the jammed paper. See page 70
"Paper Feed Problems".
Printing has been
interrupted because
of the memory
overflow.
The data is too large or
complex to print.
Select [600 x 600 dpi] in [Resolution:] to
reduce the size of data. For details, see the
printer driver Help.
Waste Toner full
No printing is
available.
Open the indicated
cover, and then
replace Print
Cartridge.
The waste toner bottle is full. Replace the print cartridge.
Error and Status Messages Appear on Smart Organizing Monitor
81