User`s guide

Appendix

5 - 3

Print the Network Configuration List and check if the settings such as IP address settings are correct for

your network. The problem may be the result of mismatched or duplicate IP address. Verify that the IP

address is correctly loaded into the print server. And make sure that no other nodes on the network have

this IP address. For information on how to print the Network Configuration List, see Printing the Network

Configuration List of the Network User’s Guide on the CD-ROM.

Verify that the print server is on your network as follows:

For Mac OS

9.1 to 9.2

(1) From the

Apple

menu, open the

Chooser

(2) Click the

SP C210SF (IP)

icon, and make sure that your print server name appears in the right frame.

If it is visible, then the connection is good. Otherwise, go to Step 5.

For Mac OS

X 10.2.4 or greater

(1) From the

menu, select

Applications

(2) Open the

Utilities

folder.

(3) Double-click the

Printer Setup Utility

icon. (For

Mac OS

X 10.2.x

users, double click the

Center

icon)

(4) Click

Add

(5) Make the following selection. Make sure that your print server appears. If it is visible, then the

connection is good. Otherwise, go to Step 5.

If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory

settings and try from the initial setup again. For information how to reset to the default factory settings,

see Restoring the network settings to factory default of the Network User’s Guide on the CD-ROM.

(Mac OS

X 10.2.4 - 10.3.x)

(Mac OS

X 10.4)