User`s guide

Installing the Drivers

2 - 5

For Mac OS

X 10.2.4 or greater

Make sure that you have completed the instructions of Quick Setup Guide from Step 1 "Setting Up the

machine" on pages 4 - 11.

Note

Read the downloaded Readme file before the installation.

For Mac OS

X 10.2.0 to 10.2.3 user, please upgrade to Mac OS

X 10.2.4 or greater.

Installing the Drivers

Turn off and unplug the machine from the AC outlet.

Note

For USB users, driver installation may not finish correctly if the USB interface cable is connected to the

machine before the installation. Before the installation, check the USB interface cable and make sure that it

is not connected to the machine.

Turn on your Macintosh

Double-click the downloaded file to install the drivers.

When the installer starts, click

Continue

Follow the on-screen instructions, and restart your Macintosh

For USB users

➝

Go to Step 6

For Network users

➝

Go to Step 7

Connect the USB interface cable to your Macintosh

and

then to the machine.

➝

Go to Step 8

IMPORTANT

DO NOT connect the machine to a USB port on a keyboard or a nonpowered USB hub.