Installation guide

What You Can Do with the TWAIN Driver
181
10
What You Can Do with the TWAIN Driver
The following is an introduction to the various functions of the TWAIN driver:
Reference
For more information about these functions or other functions, see TWAIN
driver Help.
Functions of the TWAIN Driver
Functions About Explanation
Scan Mode Standard/Pho-
to/OCR/Filing, User
saved 100 scan modes
You can call out and save the original Scan
Modes.
Orientation: Standard 0 deg./Right
90 deg./180 deg./Left
90 deg.
You can rotate the image to have originals
scanned in correct orientation depending on the
place to set the originals. If you are scanning the
duplex printed originals, set the [
Scan Settings:
]
as well.
Comb./Series Combine 2 pages to
1/Combine 4 pages to
1/divide to 2 pages/Do
not divide/No combi-
nation or division
You can divide two-page spread originals to two
individual page images, or combine duplex
printed originals to a simplex one page image.
256 Colors (in
[
Col./ Grad.:
])
← Reduces 24bit colour data to 8bit to make the
data size smaller.
Endorser User set charac-
ters/Date/Counter
You can add the information mentioned in the
left to the scanned images. You can change the
size and the fonts of the endorser.
ICM: (in [
Color
Matching
])
← When you enable ICM, the TWAIN Driver will
match the colour data according to the colour
profile.
Deskew ← Detects and corrects the tilt of the text strings.
Start from Scan-
ner
← Press the {
{{
{
Start
}
}}
} key of the scanner to start scan-
ning the originals.
Preview ← You can confirm the settings you made for the
scanning images before scanning the originals.
SADF ← Scanning starts when you set the originals on the
ADF. When you are scanning the originals which
are apt to be double fed, enable SADF and set the
originals one by one on the ADF.