Installation guide

Configuring the Scanner Settings
42
3
Initial Scanner Setup
The table on the next page shows all the setup items and their factory default val-
ues. The table also includes information about for which of the functions each of
the setup items is used (see the columns under “Purpose”), and the available
method for configuration (see the columns under “Method”).
For information about how to configure each of the setup items and how it
works, see the sections from p.52 “System Settings” to p.90 “Configuring Set-
tings Using a Web Browser”, and also see the Web Status Monitor Help.
How to Read the Function Table
Note
❒ (WSM) signifies the names of Setup Items in Web Status Monitor.
❖
❖❖
❖ The Purpose Row
Under “Purpose” in the table on the next page, there is a column for each of
the functions listed below.
Note
❒ It is not necessary to set up configuration when using as a USB TWAIN scan-
ner.
• A “” in a column means that the setup item to the left is essential to use the
function. Be sure to configure these settings before using this machine.
• A “b” in a column means that the setup item to the left is related to the func-
tion, but is not essential. Configure these settings as necessary.
• No mark in a column means that the setup item to the left has no direct rela-
tion to the function.
Column name: Means the function for:
Delivery Server Sending scan files by a delivery server using ScanRouter V2/Pro-
fessional.
Mail Sending scan files as e-mail attachments.
SMB Sending scan files to a Windows shared folder.
FTP Sending scan files to an FTP server.
Print Printing scan files.
TWAIN Using this machine as a network TWAIN scanner.